BGC Compressed Fibre Cement Sheeting is a high-density, durable product that serves as an excellent choice for flooring, decking, and other heavy-duty applications. The following installation guide aims to provide meticulous and informative instructions, based on BGC's official guidelines.
Note: Always follow the manufacturer's guidelines and adhere to local building codes. Consider hiring a certified professional for installation.
You can find a copy of the technical specifications brochure on the following link.
Required Tools and Materials
- BGC Compressed Fibre Cement Sheets
- Corrosion-resistant screws
- Measuring tape
- Chalk line
- Spirit level
- Circular saw with diamond-tipped blade
- Power drill with suitable bits
- Caulking gun
- Polyurethane sealant
- Weather barrier (for exterior applications)
- Safety gear: gloves, safety glasses, and dust mask
You can find our range of BGC Compressed Fibre Cement sheeting and accessories here.
Pre-Installation Steps
Step 1: Substrate Preparation
- Ensure that the substrate is level, dry, and free of debris.
Step 2: Layout Planning
- Use chalk lines to mark where sheets will be laid to optimize structural integrity and minimize joints.
Step 3: Weather Barrier (for exterior applications)
- If installing outdoors, lay a weather barrier according to BGC’s specifications.
Installation Procedure
Step 1: Dry Fitting
- Place the sheets in the planned layout without securing them to get an initial idea.
Step 2: Cutting the Sheets
- Measure and cut the sheets using a circular saw with a diamond-tipped blade.
Step 3: Adhesive Application
- Apply a bead of polyurethane adhesive along the top of the joists or substrate where the sheet will be placed.
Step 4: Sheet Placement
- Carefully place the first sheet, aligning it perfectly with the chalk line.
Step 5: Fastening the Sheet
- Secure the sheet to the substrate using corrosion-resistant screws, adhering to BGC's fastener spacing guidelines.
Step 6: Joint Management
- Joints must be butted closely but not forced. Use a straight edge to ensure they are flush.
Step 7: Successive Sheets
- Continue laying additional sheets in the same manner, ensuring joints are staggered for added strength.
Step 8: Sealing Edges and Fasteners
- Once all sheets are secured, apply sealant to the edges and the heads of the screws for additional protection, especially for exterior applications.
Step 9: Final Inspection
- Go over your installation to check for any inconsistencies or gaps, correcting as necessary.
Step 10: Clean-up
- Remove any adhesive spillage and clean the surface for finishing.
Tips and Tricks
- Precision Cutting: Use a guide rail with your circular saw for cleaner, more precise cuts.
- Fastener Depth: Ensure screws are flush with the surface but not overdriven, as this can weaken the material.
- Adhesive Application: Make sure the adhesive is applied evenly, without gaps, for maximum bonding efficiency.
- Final Seal: Don’t skip the final sealing process, as this offers additional protection against moisture and other elements.
By diligently following this guide and BGC's official guidelines, you can ensure a robust and enduring installation of your Compressed Fibre Cement Sheeting. These high-quality sheets offer both functional and aesthetic benefits, perfectly aligning with any heavy-duty construction requirements.