BGC Intergroove Cladding is a premium product that offers an elegant, vertically grooved panelling design with exceptional durability due to its fibre cement composition. This guide aims to provide a comprehensive, step-by-step procedure for installing BGC Intergroove Cladding.
Note: Always follow the manufacturer's guidelines and adhere to local building codes. Consider hiring a certified professional for installation.
You can find a copy of the technical specifications brochure on the following link.
Required Tools and Materials
- BGC Intergroove Cladding Panels
- Corrosion-resistant screws or nails
- Measuring tape
- Chalk line
- Spirit level
- Circular saw with a diamond-tipped blade
- Power drill with suitable drill bits
- Caulking gun
- Polyurethane sealant
- Weather barrier
- Safety gear: gloves, safety glasses, and dust mask
You can find our range of Intergroove panels and accessories here.
Pre-Installation Steps
Step 1: Substrate and Wall Preparation
- Ensure the wall and substrate are level, clean, and dry.
Step 2: Weather Barrier Installation
- Install a weather barrier following BGC's guidelines.
Installation Procedure
Step 1: Panel Layout
- Mark your layout using chalk lines to align the panels accurately.
Step 2: Cutting the Panels
- Use a circular saw with a diamond-tipped blade for precise cuts.
Step 3: Pre-Drilling and Edge Sealing
- Pre-drill holes for screws and seal the edges with polyurethane sealant.
Step 4: Installing the Starter Panel
- Align the starter panel carefully with your layout markings.
- Fasten the panel using corrosion-resistant screws or nails.
Step 5: Fastening Procedure
- Follow BGC’s guidelines for fastener type and spacing.
Step 6: Managing Panel Joints
- Install appropriate jointers or apply a joint sealant at the panel junctions.
Step 7: Additional Panels
- Install subsequent panels, ensuring accurate alignment with the previous ones.
Step 8: Sealant Application
- Apply sealant to all exposed edges and fastener heads for extra protection.
Step 9: Final Check and Cleanup
- Inspect your installation carefully, rectify any issues, and clean the surface.
Tips and Tricks
- Cutting Accuracy: Always use a guide or fence with your circular saw for exact cuts.
- Screw Spacing: Follow BGC's specific guidelines for screw or nail spacing.
- Sealant Coverage: Make sure the sealant covers all gaps and edges thoroughly.
- Vertical Alignment: Use a spirit level frequently to check the vertical alignment of the panels.
By meticulously following this guide and referring to BGC’s official installation instructions, you can confidently install Intergroove Cladding for a modern and durable facade. Remember, the premium quality of BGC Intergroove Cladding is best showcased when installed correctly, so take the time to get it right.